50 hp electric boat motor by Elco
Electric Outboard Motor - EP50

EP-50 Electric Outboard

$9,950.00

-

Comparable HP:50HP
Voltage:96 Volts
Suggested Battery Package Options:
AGM – Victron – 12V / 220Ah (8 pack)
Solid State – 96V / 210Ah (21.0kWh) (2-48V/210Ah-batteries)

Elco’s EP-50 is built on a robust chassis that turns a large propeller. This true workhorse creates incredible torque for precise maneuvering in adverse conditions. 96-volt batteries draw ample continuous amps required to power large pontoon boats to double-digit speed or push jon boats to planing speed, while boaters benefit from quiet, smooth, clean operation combustion engines can’t match.

Configure your electric outboard propulsion system using the steps below.

 

If your transom is 15″ or longer, a long shaft is recommended.

Step 2. Select Throttle Control, if remote throttle was chosen above.

(Remote throttle selection is not needed if tiller was chosen above)

Step 3. Select Batteries & Charger

If you do not have batteries and a charger, you will need to select either AGM or Lithium batteries with the matching charger type. If you already have batteries but need a charger, select the applicable charger based on the type of battery you have.

Step 4. Select Battery Connection Kit

Pre-assembled battery connection cables simplify motor installation. Our 7-foot electric battery cables and 18-inch battery jumper cables are adequately sized based on the motor amp draw. Swaged terminal ends are sealed with epoxy-impregnated heat-shrink tubing where they connect to marine-grade fuse blocks, Anderson motor connectors, and batteries.

Step 5. Select Battery Monitor

Battery monitors help you take better care of your battery. Your battery monitor also provides real-time and historical information on voltage, power consumption, and more.

  • *

    Elco DASH App – Bluetooth Connector

    $345.00

    Elco’s DASH motor app wirelessly turns any iOS or Android mobile device into a full-function dashboard.

    (DASH Bluetooth connector required on the motor, included with purchase)

    Click Store to Download after install

    AddRemove

    Elco NMEA 2000 Gateway

    $545.00

    Elco NMEA 2000 Gateway: If you purchase the Elco NMEA 2000 gateway separately, it will be pre-installed in your Elco outboard or inboard. To ensure everything works smoothly, make sure your depth finder or chart plotter supports NMEA 2000, as features can vary by model. You’ll also need to buy a complete NMEA 2000 starter kit for installation. For the best results, consider consulting a marine professional for setup help.

    AddRemove

    VICTRON BMV-710H BLUETOOTH BATTERY MONITOR KIT

    $728.00

    This monitor is used to see how much charge you have left in your batteries.

    AddRemove

Step 6. Select Electric Trim and Tilt

Electric trim and tilt units simplify boat operation, increase performance and safety. This electric trim and tilt model matches this electric outboard.

Product total

Options total

Grand total

SKU: EP-50 Category: Tag:

Our EP-50 is a clean alternative to a traditional 50 hp gas-powered outboard boat motor. Elco’s EP-50 is built on a robust chassis that turns a large propeller. This true workhorse creates incredible torque for precise maneuvering in adverse conditions. 96-volt batteries draw ample continuous amps required to power large pontoon boats to double-digit speed or push jon boats to planing speed, while boaters benefit from quiet, smooth, clean operation combustion engines can’t match. Remote or tiller control and long or short shaft lengths accommodate most boats. NMEA 2000 and Elco’s DASH app seamlessly connect to navigation displays as well as wireless and wearable screens.

Check out our full lineup of electric outboard motors here: https://www.elcomotoryachts.com/product-category/electric-outboards/

FREQUENTLY ASKED QUESTIONS – FAQ’s

What is the electric equivalent of a 50 hp gas motor?

Our EP-50 Electric Outboard is the equivalent to a 50hp boat motor.

How much does the EP-50 boat motor weigh?

Our EP-50 Electric Outboard weighs slightly less than standard 50hp-model gas outboards.

Can this replace my current 50 hp outboard?

Yes! Our EP-50 efficiently replaces current 50hp gas powered boat motors. It provides powerful propulsion with quiet operation and significantly reduces the environmental impact. This is a great option for electric-only lakes and beyond!

Why choose the EP-50 Electric Outboard Motor over a 50hp gas boat motor?

There are so many benefits to running our EP-50 electric outboard motor instead of a gas powered 50hp boat motor. Our electric boat motors are quiet, efficient to run, powerful, easy to operate and reduce the need to ever buy fuel again!

Not Ready To Buy?

Learn More

Specifications

 

BATTERY VOLTAGE (NOMINAL)96 Volts
BATTERY VOLTAGE (OPERATING RANGE)80-120 Volts
BATTERY CURRENT (MAXIMUM CONTINUOUS) 400amps
SUGGESTED BATTERY CAPACITY200Ah-400Ah
KILOWATTS (CONTINUOUS)38.4
STATIC THRUST975lbs
MAXIMUM RPM6000 RPM
PROPELLER3 - 9 7/8 x 12”
LOWER UNIT GEAR RATIO2.08:1
SUGGESTED FOR BOAT LENGTHS (LOA)16’- 46’
SUGGESTED FOR BOAT WEIGHTSabove 1,400lbs
COMPARABLE HORSEPOWER50HP
HP REPLACEMENT RANGE35-55HP
OUTBOARD WEIGHT190lbs
SHORT SHAFT OVERALL (LENGTH, WIDTH, HEIGHT)27.7"x14.8"x45.4"
SHORT SHAFT OVERALL (LENGTH, WIDTH, HEIGHT)27.7"x14.8"x50.4"
MSRP$9,950

Related products

  • 30 hp electric boat motor by Elco
    Select options Quick View

    EP-30 Electric Outboard

    $7,950.00

    -

  • 5 hp electric motor - EP5
    Select options Quick View

    EP-5 Electric Outboard

    $3,150.00

    -

  • 10 hp electric outboard motor - EP9.9
    Select options Quick View

    EP-9.9 Electric Outboard

    $3,450.00

    -

  • Electric Outboard Motor - EP14
    Select options Quick View

    EP-14 Electric Outboard

    $4,950.00

    -