Elco’s EP-14 utilizes a larger chassis than the EP-9.9. This turns a bigger propeller that maximizes efficiency and provides extra torque when pontoon boats and larger sailboats need to overcome wind or waves while docking. 48-volt operation optimizes performance and efficiency. Remote or tiller control and long or short shaft lengths accommodate most boats. NMEA 2000 and Elco’s DASH app seamlessly connect to navigation displays as well as wireless and wearable screens.
EP-14 Electric Outboard
$4,950.00
-
Comparable HP:14HP
Voltage:48 Volts
Suggested Battery Package Options:
AGM – Victron – 12V / 130Ah (4 pack)
Solid State – 48V / 120Ah (6.0kWh) (1 pack)
Elco’s EP-14 utilizes a larger chassis than the EP-9.9. This turns into a bigger propeller that maximizes efficiency and provides extra torque when pontoon boats and larger sailboats need to overcome wind or waves while docking. 48-volt operation optimizes performance and efficiency.
Configure your electric outboard propulsion system using the steps below.
If your transom is 15″ or longer, a long shaft is recommended.
Specifications
| BATTERY VOLTAGE (NOMINAL) | 48 Volts |
| BATTERY VOLTAGE (OPERATING RANGE) | 40-59 Volts |
| BATTERY CURRENT (MAXIMUM CONTINUOUS) | 130Ah |
| SUGGESTED BATTERY CAPACITY | 130Ah-225Ah |
| KILOWATTS (CONTINUOUS) | 6.2kW |
| STATIC THRUST | 275lbs |
| MAXIMUM RPM | 5000 RPM |
| PROPELLER | 3 - 9.25” x 8” |
| LOWER UNIT GEAR RATIO | 2.08:1 |
| SUGGESTED FOR BOAT LENGTHS (LOA) | 10’-12’ |
| SUGGESTED FOR BOAT WEIGHTS | 700lbs |
| COMPARABLE HORSEPOWER | 14HP |
| HP REPLACEMENT RANGE | 12-16HP |
| OUTBOARD WEIGHT | 85lbs |
| SHORT SHAFT OVERALL (LENGTH, WIDTH, HEIGHT) | 18.5"x11"x43" |
| SHORT SHAFT OVERALL (LENGTH, WIDTH, HEIGHT) | 18.5"x11"x46" |
| MSRP | $4,950 |
Related products
-
EP-5 Electric Outboard
$3,150.00-
-
EP-9.9 Electric Outboard
$3,450.00-
-
EP-30 Electric Outboard
$7,950.00-
-
EP-50 Electric Outboard
$9,950.00-
