EP-250 Electric Inboard

Select female for motor and male for prop shaft if needed.

• *

  

  Female Coupling for Motor 1-1/4

  $268.00

  Solid hub flange- 4IN X 1-1/4IN bore

  AddRemove

  

  Male Coupling for Prop Shaft

  $268.00

  4" Flange - Select size based on your prop shaft

  Male Coupling for Prop Shaft - 3/4 Inch (50MC004075)Male Coupling for Prop Shaft - 7/8 Inch (50MC004087)Male Coupling for Prop Shaft - 1 Inch (50MC004100)Male Coupling for Prop Shaft - 1-1/8 Inch (50MC004112)Male Coupling for Prop Shaft - 1-1/4 Inch (50MC004125)Male Coupling for Prop Shaft - 1-1/2 Inch (50MC004150)

  AddRemove

If you do not have batteries and a charger, you will need to select either AGM or Lithium batteries with the matching charger type. If you already have batteries but need a charger, select the applicable charger based on the type of battery you have.

• *

  

  EV – AGM – 350V BATTERY CHARGER

  $1,250.00

  * Deep Cycle chargers are only compatible with Deep Cycle Batteries.

  AddRemove

  

  VICTRON 12V AGM – 220AH (32 PACK)

  $21,408.00

  350 Volt Power Supply, 32 Batteries – 12V / 220Ah | L-20.6″ x W-9.4″ x H-9.4″ | 143lbs ea.

  AddRemove

  

  EV – LITHIUM – 350V BATTERY CHARGER

  $1,250.00

  * Lithium chargers are only compatible with Lithium Batteries.  

  AddRemove

  

  SOLID STATE LITHIUM BATTERY – 350V – 210Ah (84.0kWh) = (8) 210Ah-48V-BATTERIES

  $47,920.00

  Unparalleled Performance: More Power. Less Weight. Greater Safety Size (L x W x H):20.47″ x 10.55″ x 10.88″ Weight: 100lb/ea

  AddRemove

Pre-assembled battery connection cables simplify motor installation. Our 7-foot electric battery cables and 18-inch battery jumper cables are adequately sized based on the motor amp draw. Swaged terminal ends are sealed with epoxy-impregnated heat-shrink tubing where they connect to marine-grade fuse blocks, Anderson motor connectors, and batteries.

• *

  

  Battery Connection Kit | EP200-IB | 7 FT

  $680.00

  Use this 7ft Battery Connection Harness to connect your batteries.

  Compatible with Inboards: EP-200

  AddRemove

Battery monitors help you take better care of your battery. Your battery monitor also provides real-time and historical information on voltage, power consumption, and more.

• *

  

  VICTRON BMV-710H- BLUETOOTH BATTERY MONITOR (2 Pack)

  $1,550.00

  This monitor is used to see how much charge you have left in your batteries.

  AddRemove

  

  Elco NMEA 2000 Gateway

  $545.00

  Elco NMEA 2000 Gateway: If you purchase the Elco NMEA 2000 gateway separately, it will be pre-installed in your Elco outboard or inboard. To ensure everything works smoothly, make sure your depth finder or chart plotter supports NMEA 2000, as features can vary by model. You’ll also need to buy a complete NMEA 2000 starter kit for installation. For the best results, consider consulting a marine professional for setup help.

  AddRemove