EP-20 Electric Outboard

$4,804.00

-

Voltage: 48 Volts
Suggested Battery (Ah): 175 amps DC
Comparable HP: 20HP

Congratulations on getting one step closer to purchasing your award-winning Elco Electric Outboard. Select the options and accessories below.

Download Spec Sheet
Download Dimensions Sheet

Clear

Step 2. Select Throttle Control

You need to select a type of throttle control for your outboard

  • Electric Outboard Motor - EP9.9

    Tiller control to steer from the motor

  • Livorsi Throttle - electric outboard motor

    To be mounted on the side

  • electric outboard motor - Livorsi Top Mount Remote Throttle

    To be mounted on the top

Step 3. Select Essential Accessories

You may need the following items. If you have them continue with the order, if not add them below.

  • electric outboard motor -Battery Connection Kit

    You need this kit to connect your outboard to your batteries.

  • electric outboard motor - Victron BMV-700H

    This monitor is used to see how much charge you have left in your batteries.

  • electric outboard motor - Electric Hydraulic Model 40 Tilt & Trim

    This is a remote-controlled tilt to lower and raise your outboard from the water.

Step 4. Select Charger & Batteries

You will need a charger and batteries to run your motor. If you do not already have a setup, choose between a Deep Cycle setup or Lithium-ion setup.

  • electric boat motor - NOCO GEN-4 On-Board Battery Charger

    * Deep Cycle chargers are only compatible with Deep Cycle Batteries.

  • electric outboard motor - Victron 12v AGM Telecom – 115Ah

    48 Volt Power Supply
    4 Batteries - 12V/165Ah | L-19.1" x W-6.8" x H-9.4" | 103lbs. ea.

  • GX2440 Industrial Charger - electric boat motor

    * Lithium-Ion chargers are only compatible with Lithium-Ion Batteries.

  • electric boat motor - lithium battery

    48 Volt Power Supply
    1 Battery - 51.8V/148Ah | L-25" x W-13" x H-7.85" | 110lbs.

Product total

Options total

Grand total

SKU: EP-20 Category: Tag:

EP-20 ELECTRIC OUTBOARD FEATURES AND BENEFITS

• Reliable and durable construction with minimal maintenance required
• Available in tiller or top- and side-mount throttle control
• All motors available in long- or short shaft models
• Traditional aluminum casting so replacement parts are readily available
• Water-cooled system that prevents over-heating
• Multiple safety precautions including over-speed protection, overload protection, temperature protection, over-voltage and over-current protection
• Consistent power throughout the speed range
• Brushless PMAC motor that is over 90-percent efficient
• Cruise with peace of mind thanks to our “Get Home Safe” battery alert system
• Clean cruising without the hassles and hazards of gasoline
• Low cost of operation compared to traditional gas motors

See how easy it is to install the Elco electric outboard.

Specifications

COMPARABLE GAS/PETROL RATING 20 hp
INPUT POWER (WATTS) 8,400 watts
VOLTAGE 48 VDC
MAXIMUM CURRENT 175 amps DC
MOTOR Brushless PMAC
STATIC THRUST 390 lb
COOLING SYSTEM Water Cooled
THROTTLE SYSTEM Remote control or Tiller option
THROTTLE Side mount or Top mount option, 16′ length
THROTTLE CABLE EXTENSION OPTIONAL 6’
LOWER UNIT GEAR RATIO 2.08:1 (27/13)
GEAR OIL CAPACITY 8.5 ounces
TRIM AND/OR TILT Manual or Electric
PROPELLER 3- 9.25″ x 8″
WEIGHT 85 lbs
SHORT SHAFT TRANSOM HEIGHT 17.15″ 
SHORT SHAFT OVERALL (HEIGHT, WIDTH, LENGTH) 41″ x 11″ x 18.5″ 
LONG SHAFT TRANSOM HEIGHT 22.15″ 
LONG SHAFT OVERALL (HEIGHT, WIDTH, LENGTH) 46″ x 11″ x 18.5″
MSRP $4,804