Repowering with an Elco Electric Motor

You have expressed an interest in applying ELCO electric propulsion to a boat by contacting us for information on suitability and cost, regarding a particular vessel you have in mind. There is key information about your boat that is needed for the proper sizing and application of electric propulsion which, when supplied to us accurately, results in a very efficient and satisfying installation. Please review the following list of important questions and answer them as completely as you can, this information becomes the tool needed to provide you with the best possible response to your request.

1. Hull type:

, flat-bottom.

2.

3.

4.

lbs.

5.

hp

6.

kts

7.

hrs.

8.

9.

Please note these motors are designed to replace gas or diesel inboard motors in a displacement type of hull such as a sailboat, trawler or launch where speed is limited to a function of the length of the water line of your boat. 1.3 X the square root of the length at the water line = hull speed. Example for a boat that is 36′ on LWL: 1.3 X 6 ( sq. root of 36 ) = 7.8 knots.